Radars may be switched off without notice. I do this if the area of interest has moved outside the domain and to cut
down on wasteful processing power. However, the radars over Florida will mostly remain active. If a radar has stopped
updating, the radar site may be experiencing technical difficulties. You can monitor the status of any radar site at
Eight different Volume Coverage Patterns (VCPs) are available which control the sampling rate and elevation angles of the
radar. The two most basic radar states are clear air mode and precipitation mode. I plot the lowest elevation
angles as those are the most useful.
VCPs 31, 32, and 35 represent clear air mode. These VCPs are the default setting for quiescent conditions without storms,
but they can be helpful for detecting light precipitaton, such as snow, due to their high sensitivity. Typical volume scans
last 10 minutes.
VCPs 12, 112, 121, 212, and 215 are the various precipitation modes. VCP 12 provides dense vertical sampling, useful
for severe thunderstorms. VCP 212 updates quickly and is helpful for detecting distant storms far from the radar site. VCP
121 is primarily used in tropical systems because it provides improved doppler velocity data. VCP 215 is known as 'general
surveillance' mode as it features good lower and upper level vertical sampling. Typical volume scans last 5 minutes.
Sometimes a radar site updates more frequently than 5 or 10 minutes. This is because the radar site has been placed into
SAILS (Supplemental Adaptive Intra-Volume Low-Level Scan) mode which adds additional lower level scans to the main
Images may be up to 10 minutes old and are stored for 7 days.
You are welcome to share and manipulate the images as long as there is some form of citation.